News
News Center
Industry News
Company News
Introduction to all kinds of terminals

Introduction to all kinds of terminals

This is by far the most common kind of audio/video connection terminal. This two-wire connection terminal was invented by RCA Recording Company as early as the era of radio. There is also a more old-fashioned and strange name called "turntable" connector. The RCA terminal uses a coaxial transmission signal, the central axis is used to transmit signals, and the contact layer on the outer edge of a circle is used to ground, and can also be used to transmit digital audio signals and analog video signals.

16

2023

/

10

What are the advantages and disadvantages of terminals

What are the advantages and disadvantages of terminals

Terminal blocks can also be called "screw terminals", which are essentially a form of electrical interchange that can distribute power to your equipment. Terminals are commonly used in the automotive electrical field and are a routing tool that connects different circuits within a circuit and to each other.

16

2023

/

10

Development History and Trend of Connector Terminal Products

Development History and Trend of Connector Terminal Products

Terminal is one of the most widely used electronic components, widely used in computer, telecommunications, network communications, industrial electronics, transportation, aerospace, medical equipment and automotive industry and other fields.

16

2023

/

10

What is the terminal

What is the terminal

The function of the wiring terminal is well stated. The wiring terminal is actually a kind of connector. It is used to facilitate the connection of wires. It is actually a piece of metal sealed in insulating plastic. There are holes at both ends to insert wires. Screws are used to tighten or loosen, such as two wires, sometimes need to be connected, sometimes need to be disconnected, then they can be connected with terminals and disconnected at any time, without having to weld them or wrap them together, it's easy and quick.

16

2023

/

10

Common faults and problems of terminals

Common faults and problems of terminals

From the perspective of use, the function that the terminal should achieve is that the contact part must be conducted and the contact is reliable. Insulated parts that should not be conducted must be insulated reliably.

16

2023

/

10

How to detect terminal short circuit fault

How to detect terminal short circuit fault

The failure of the wire and the terminal may also be caused by a short circuit between the wire harness and the body (ground wire) or within the relevant switch. Before checking, first check whether the terminals of the body are firmly fixed, and then test according to the following steps.

16

2023

/

10

How to Preventive Screening Check

How to Preventive Screening Check

In order to ensure the quality and reliability of the terminal and prevent the occurrence of the above-mentioned faults, it is recommended to study and formulate the corresponding screening technical requirements according to the technical conditions of the product, and carry out the following targeted reliability inspection for failure prevention.

16

2023

/

10

What are the concepts of

What are the concepts of "connector", "connector" and "terminal?

Connectors, also known as connectors, plugs and sockets in China, generally refer to electrical connectors, that is, devices that connect two active devices to transmit current or signals (electrical signals or optical signals). Its function is very simple: it is blocked in the circuit. Or between isolated and disconnected circuits, a bridge of communication is built, so that current flows and the circuit realizes the intended function.

16

2023

/

10

< 12 >

Jiangmen Houjie Electronics Co., Ltd.

Service Hotline:

+86-750-3327009

Company Address:

5th Floor, Building 3, No. 163 Jinxing Road, Jianghai District, Jiangmen City, Guangdong Province, China

Website Navigation
Product display
News
Contact Us
QR

QR

Powered by: www.300.cn Jiangmen Tag

License